RepairServicesUpgradesCustomFabrication

 

AboutUsLocationEVProjectsScooters For SaleLinksHome

credit cardsLight electric vehicle
repair and service
240-687-1678

2353 Distribution Circle
Silver Spring, MD

Silver Spring Shop Hours
Tuesday: 11am to 6pm
Wednesday: 11am to 6pm
Thursday: 11am to 6pm
Friday: 11am to 6pm
Saturday: 11am to 5pm

Winter hours will vary so
it's best to call ahead.


Baltimore Area
We have a location in Laurel for drop offs and pickups. Hours are limited and require an appointment. Call us at 240-687-1678.

Pickup and Delivery
Fee is $25 per trip or $40 round trip within 10 miles of Silver Spring.

repairs@electroscooter
works.com

Electric scooter and bicycle repair in the Washington, DC metropolitan area.

We are an authorized repair facility for Razor and Currie Scooters. We also work on the following scooters and bikes.

  • A2B
  • BladeZ
  • eGo Vehicles
  • eZip
  • E-Bike
  • EVT
  • Go Motorboard
  • HCF
  • iZip
  • Kasea
  • Lashout
  • Lepton
  • Numo Cruiser
  • Schwinn
  • Rad2Go
  • Vego

Our Latest Custom Project

A dual-motor Schwinn Missile

 

BionX Installation

Service Center for Razor, Power Wheels, Dynacraft, Peg-Perego and Currie tech

ElectroScooterWorks is an authorized repair facility for Razor electric scooters, Power Wheels ride-ons, Dynacraft ride-ons and Currie (Izip, Ezip, Mongoose and Schwinn) scooters. We also repair electric bicycles and install electric bicycle kits featuring BionX and Crystallite systems. We serve Maryland, DC and Virginia. And have customers as far as Richmond, Maryland's Eastern Shore and Philadelphia.

We are convenient to the Beltway in Silver Spring, Maryland, sharing space with the Green Commuter, a local bicycle shop specializing in electric bicycle conversions.

PICK UP AND DELIVERY $25 PER TRIP OR $40 ROUND TRIP

For Power Wheels, Dynacraft and Peg-Perego vehicles we can pick up and deliver your ride-on within 10 miles of Silver Spring. Cost is $25 per trip or $40 round trip.

CUSTOM ELECTRIC BIKES

joker

This Schwinn Spoiler was built for a customer in Chicago. It features a Crystalite 3500 watt hubmotor and 72 volt lithium battery pack. A custom battery box was fabricated out of sheetmetal and powder coated to match the bike.

 

joker

The Joker Bike features a custom built frame and handlebars, big 3 inch wide flame tread tires, rear disc brake and custom long chain guard. The electric motor and battery are WaveCrest components. The bike has regenerative braking, turbo mode and cruise control.

 

Stiletto

We caught the chopper craze and are pleased to announce our latest creation. A power assist Giant Stiletto featuring a Heinzmann hubmotor, a removable 36-volt NiMH battery pack, motor controller and lighting effects. This bike will cruise up to 25 mph and has built-in cruising and turbo mode. With both pedaling and electric capabilty the rider can pedal, cruise on electric power or both.

ElectroScooterWorks can install Heinzmann, Crystalite, Falcon and Phoenix hub motor conversions on either the front or rear wheels. This particular version of the Stiletto has Heinzmann motor installed on the rear.

Since the bike originally was equiped with a rear disc brake and the power wire coming into the hubmotor was on the same side of the brake we had to remove the disc brake and locate the mounts for the rear brake on the lower portion of the frame. This required welding in new brake brackets for the new rear v-brakes. All work is done in-house.

The motor that was originally installed on the front wheel of the Stiletto is now installed on our "Toe Cutter" Electric Chopper.

Both bikes were built for our partner, SkooterCommuter and the Stiletto is used daily for commuting.

Toe Cutter was one first electric chopper bike project based on a Schwinn Spoiler. It features a Heinzmann hubmotor mounted on the front rim and color matched to match the rear rim. The 36-volt NiMH battery is mounted mid frame. The bike features neon lighting between the front forks, a motorcycle headlight and dual trumpet air horns. Top speed is 25 mph and we installed a smaller sprocket up front for easier pedaling.

 

Heinzmann Hubmotor Installation

For power assist bicycles we install the Heinzmann hub motor system. Available for bikes from 16" to 27" inches. The hub motor is built into the hub of the wheel eliminating the need for sprockets, belts and chains.

We can have a hub motor installed for your bike's particular rim size and install the battery and controller. Systems are available from 24 to 36 volts and we can also install the system on a pedicab. Call us for further details.

Custom Scooter and Bike Work

With over 10 years in the electric vehicle business converting cars to run on electricity, we have the capability to design and build many types of electric scooters and power assist bikes.

One of our latest creations is a Y3K semi-recumbant bike built for our client SkooterCommuter featuring dual Heinzmann motors powered by a 36-volt NiMH battery pack. The motors can be run together, alone or can assist as you pedal the bike up a steep hill.

Scooter Parts

Since there are a wide variety of scooters available today we cannot possibly stock every part. If your scooter needs a part that we do not have during the repair we can give you the option of expedited shipping if the part is available from the vendor. If the company that built your scooter is no longer in business we can substitute other parts such as a throttle, motor and controller.


Repair Services | Upgrades | Custom Fabrication
About Us | Location | EV Projects | Links | Home

©2015 ElectroScooterWorks, LLC
2353 Distribution Circle • Silver Spring, Maryland 20910
240.687.1678
repairs@electroscooterworks.com

 

a2b